DUAL XDM27BT INSTALLATION & OWNER'S MANUAL Pdf Download (2025)

FAQs

What is the pairing code for dual xdm27bt? ›

The Bluetooth passcode is "1234”. Note: The head unit can be in any mode of operation when pairing is performed.

The device name is “Dual Media Player”. The Bluetooth passcode is "1234”. Note: If passcode "1234" does not pair your device to the receiver, use passcode "0000".

Press RESET upon initial installation or if abnormal operation occurs. The reset hole is located under the volume knob of the front panel. With the unit on, press and hold DISP until the clock begins to flash, then release.

the 4 digit pin is usually default to 0000 or 1111. If pairing, it can also be anything you choose, providing that you enter the same 4 digits into both items to pair.

Dual iPlug S is an app designed to control certain Dual brand radios. It can select from 4 different sources; Radio mode, USB mode, Bluetooth music mode and AUX mode via Bluetooth control. - Radio mode on the APP allows you to scan and store radio stations or select your favorite radio station via the radio presets.

Open quick settings, touch & hold the media player, and touch . Or, go to Settings > Sound & vibration > Media. Turn Pin media player off .

Understanding the Android PIN Code

It is usually a 4-digit number, though some devices allow longer PINs. When you set up a PIN, the device encrypts data and can only be accessed by entering the correct PIN.

Enabling Dual Audio: Go to Settings > Connections > Bluetooth. Tap on More options (the three vertical dots) > Advanced, and then enable Dual audio. If asked, disable Media volume sync. Volume Control: On Android 9, the volume for both devices adjusts simultaneously with the phone's volume keys.

Simply enter into Pairing Mode while connected to the current two devices, and pair normally to the new device. Once connected to the newly added device, the device that was first paired to your earbuds will be disconnected and you are now paired to two most recently paired devices via Multipoint.

If your Bluetooth devices won't connect, it's likely because the devices are out of range, or aren't in pairing mode. If you're having persistent Bluetooth connection problems, try resetting your devices, or having your phone or tablet "forget" the connection.

What does resetting the Bluetooth module do? ›

If you have problem with a connected Bluetooth device you can reset the Bluetooth module entirely from the Debug menu. This will wipe the Bluetooth configuration, reset the Bluetooth hardware, and disconnect any connected Bluetooth devices.

Most Bluetooth FM transmitters have a display and control buttons. Look for buttons labeled “CH,” “Channel,” or with “+” and “-” symbols. These buttons are used to change the frequency.

In the vast majority of devices with PINs they are set to 0000 or 1234. Other than that you would have to learn it from the manufacturer. Your android device will not have the saved PIN anywhere because PIN is used only temporarily during pairing procedure, then other outputs (keys) are saved for future connections.

The default pair code is 0000 for all Bluetooth devices.

Many Bluetooth devices use "1234," "1111," and other simple passkeys by default. If you entered the correct passkey, your phone will pair with the hands-free calling system in your car. If it doesn't, repeat the steps you already took and make sure that you put the correct passkey in.

If a passkey* is required on the display of the BLUETOOTH device, enter “0000.” A passkey may be called “Passcode”, “PIN code”, “PIN number” or “Password.” Make the BLUETOOTH connection from the BLUETOOTH device. When the BLUETOOTH connection is established, the (BLUETOOTH) indicator stays lit.