DUAL XVM279BT INSTALLATION & OWNER'S MANUAL Pdf Download (2025)

FAQs

What apps do I need for dual XVM279BT? ›

Use the Dual iPlug P1 Smart App Remote Control on an Apple or Android smartphone to control the receiver via Bluetooth.

The device name is “Dual Media Player”. The Bluetooth passcode is "1234”. Note: If passcode "1234" does not pair your device to the receiver, use passcode "0000".

Dual iPlug S is an app designed to control certain Dual brand radios. It can select from 4 different sources; Radio mode, USB mode, Bluetooth music mode and AUX mode via Bluetooth control. - Radio mode on the APP allows you to scan and store radio stations or select your favorite radio station via the radio presets.

The app allows for control of most primary functions including: * Volume Up/Down. * Power On/Off. * Mode change - Radio, USB, Bluetooth, AUX input. * Radio mode – Bands (FM1, FM2, FM3, AM1, and AM2), Seek, Preset Scan, Auto Store, Station Presets and storing Radio Presets.

To get audio to multiple speakers, use an app such as AmpMe, Bose Connect, or a few from Ultimate Ears, as well as Bluetooth 5, which send audio to two devices at once. Instructions in this article apply to Bluetooth speakers connected to Android, Amazon Echo, or Google Home devices.

Try these places first: Glovebox – Some radio codes appear on a sticker in the glovebox. Vehicle handbook – You might find the code in your vehicle handbook under the stereo or security section.

Bluetooth should be paired between your smartphone and the receiver. Press the voice activation button, and the receiver will switch into Bluetooth mode, This will activate Siri® or Google Assistant™ on your smartphone.

Press the RESET button to reset the unit back to the factory settings if abnormal operation occurs. The reset button is located behind the front panel. With the unit on, press and hold DISP until the clock begins to flash, then release. Press TUNE nnto adjust the hours and TUNE llto adjust the minutes.

Enabling Dual Audio: Go to Settings > Connections > Bluetooth. Tap on More options (the three vertical dots) > Advanced, and then enable Dual audio. If asked, disable Media volume sync. Volume Control: On Android 9, the volume for both devices adjusts simultaneously with the phone's volume keys.

Dual Sound (A2DP) lets you listen to music from your mobile device while gaming. You can control the music on your phone or tablet while not disturbing your gaming experience. Note: Volume and playback controls are only possible on the mobile device and not on the headphones.

What is the difference between dual band and dual radio? ›

Dual band refers to a device which uses two different frequencies to communicate. Dual radio refers to a device which uses two different protocols to communicate.

Use the Dual iPlug Smart Remote app on an Apple® or Android™ smartphone to control the receiver via Bluetooth. Change the mode, station, song, volume, and settings directly from your smartphone without being in the receiver's line-of-sight.

Ensure that Bluetooth is activated on your device before beginning the pairing process. The head unit broadcasts the pairing signal constantly when no devices are connected. Complete the pairing sequence from your Bluetooth device. Refer to the owner's manual for your device for more details.

With the vehicle Off, insert the USB Thumb Drive with Update Firmware into the XDCPA10BT USB Port. Turn the vehicle On, the radio will boot up with the update screen. Once the update is complete, the radio will shut down and power back up. Remove the USB Thumb Drive from the unit.